Buying equipment throughout WisconsinCall (614) 715-3047saleselectricalbuyers@gmail.com
Large gray electrical cabinets lining an industrial interior aisle.
Industry equipment buyer

Sell switchboards from hospitals and campuses in Wisconsin

Offer switchboards from a hospital or campus electrical upgrade, building closure, or consolidation. We handle the agreed disconnect, rigging, and freight.

✓ We buy equipment. We do not sell it.
  • ✓Payments Upfront
  • ✓No Testing
  • ✓We Cover All Freight
  • ✓All Voltage Classes Bought

What we buy: switchboards

Switchboards distribute incoming power through a main section and feeder sections. Sellers may have a complete board, individual sections from a renovation, or spare devices from a replaced distribution system. We consider equipment across all voltage classes and review each proposed purchase.

If you have switchboards from hospitals and campuses in Wisconsin, you can ask about a single assembly or a larger disposition. The equipment may already be disconnected, or it may need a planned release from the site. We consider used, surplus, and decommissioned assets and review each offer on its own merits rather than quoting an unsupported price or guaranteeing purchase of every lot.

Selling from hospitals and campuses

A hospital or campus may release transfer switches, switchboards, switchgear, breakers, or panelboards while retaining essential and normal distribution paths. Identify the building, actual devices offered, and any loads or emergency-power connections that must remain untouched.

Patient care, emergency services, research, classes, and other occupied functions can limit work windows and travel paths. Tell us about security escorts, infection-control or clean-area restrictions if applicable, protected routes, and authorized facilities contacts. The facility controls the release and any outage approval.

We handle all rigging and logistics for the accepted purchase, including arranging the qualified electrical disconnect, crane when needed, loading, hauling, and all freight. We coordinate the work with the authorized site and utility contacts; the seller is paid upfront before removal work begins.

Photos, labels, and an honest equipment description

Photograph the overall board, the main nameplate, the main device, feeder labels, and any section or device tags visible without opening energized equipment. Ampere rating, voltage, number of sections, enclosure type, and a one-line diagram help distinguish the board from a collection of individual breakers.

For switchboards from hospitals and campuses in Wisconsin, a useful first set shows the full assembly from a safe distance and readable close-ups of labels visible from outside. If several units look similar, indicate quantities and note different ratings. An existing list, one-line drawing, or dimensions can help, but an incomplete record does not prevent you from starting. Never remove a guard or cover for a photo.

Condition, completeness, and seller testing

Tell us whether the main and feeder devices remain installed, whether covers and bus connections are present, and if the board has been modified. Report known water damage or missing sections rather than trying to restore it before asking. We review equipment as presented and do not require seller testing.

You can offer the switchboards as-is; you do not have to test, clean, or repair the equipment first. Let us know if components are missing or a particular section has been damaged. Known fluid, asbestos, contamination, or other material concerns need to be disclosed and assessed before a purchase can be agreed. Do not open, disturb, or sample suspect material for the sake of an offer.

Electrical disconnect and safe release

Switchboards are often anchored and connected to cables or busway above or below. A photo showing those connections, the surrounding floor space, and the route to an outside door helps our crew plan a safe disconnect and lift. We coordinate that work rather than asking the seller to cut cables or move the board.

We arrange and pay for the disconnect of the switchboards included in an accepted purchase, using appropriately qualified personnel and coordinating with the facility and utility when needed. The authorized site controls access, identifies retained circuits, and approves the work window. Qualified personnel verify isolation and address stored energy using applicable procedures; a seller should not attempt electrical work to prepare for a sale.

Rigging, crane, loading, hauling, and freight

The buyer handles all rigging and logistics for an accepted purchase involving switchboards. We plan the move, arrange a crane when needed, provide the handling crew, handle loading, haul the equipment away, and pay all freight. Our team also arranges the electrical disconnect. The seller does not need to find a rigger, put equipment on a truck, or pay a separate freight bill for the agreed purchase scope.

If the switchboards is scattered across a site, list the rooms and the best access contact for each. Note any overhead wires, door or gate limits, unfinished floors, and available yard space. Unknown weights are acceptable at the initial discussion. Our team uses the agreed scope and access information to coordinate qualified crews, equipment, and freight.

Cash offer and upfront payment

We review switchboards from hospitals and campuses in Wisconsin and can offer money for the equipment we agree to buy. The seller gets paid upfront, before disconnect, rigging, or hauling begins. Our written terms identify the purchased assets, payment method, timing, and agreed pickup scope. A cash offer is not a claim that payment must be physical currency, and a review does not obligate you to sell.

For the switchboards, describe all pieces you intend to transfer and any that must stay. We do not publish made-up prices; the actual equipment and the work involved determine whether we can make an offer. Confirm who owns the lot and whether a lease, lien, property transaction, or utility agreement requires another party's authorization before a sale.

Prepare the scope and ask your next question

Should the main and feeder sections be sold together? Tell us what must remain in the building, including any devices serving active loads. We will define the sale boundary before offering on the material available.

To start a discussion about switchboards from hospitals and campuses in Wisconsin, provide the Wisconsin city or county, your contact and authority to sell, the equipment type and quantity, safe photos of visible nameplates, and the known availability date. Mention if another contractor or a property sale affects access. You can describe an upcoming release even if the equipment is still installed; the exact pickup schedule is coordinated after the scope is understood.

The next step is a review of the actual switchboards, site, and proposed timing. We buy equipment rather than market it for sale, and an accepted transaction gives the seller upfront payment before our arranged disconnect and removal. Keep uncertain details marked as unknown, and make sure the final written scope separates sold equipment from anything the property retains.

Let's get started

Tell us what
you have.

Share a few details and photos of the equipment nameplate. We buy equipment across Wisconsin, pay upfront and handle all rigging and logistics.

No testing required from the seller. We cover all freight and buy all voltage classes.

Rows of gray switchgear cabinets on pallets across a warehouse floor.

Request a quote

Tell us about your equipment. Fields marked * are required.

JPEG or PNG. Up to 10 MB total for all photos. You can also text photos to us.

Add up to two more photos

Photo upload delivery is not yet verified. Please also text or email your photos so they are not lost.

Your request and photos are sent through FormSubmit to saleselectricalbuyers@gmail.com. For help, call or text (614) 715-3047.

The heavy lifting is on us

Clear the site.
Get paid.

We buy electrical switchgear out of decommissioned data centers and shut-down power plants.

We handle all rigging and logistics. Crane, rigging, disconnects, loading, freight and hauling are on us. The seller does nothing but get paid.

Cash offers, payments upfront, no testing required from the seller, all voltage classes bought.

Request a Quote ↗